Nikon P6000 P6000 User's Manual - Page 199

Error Messages The following table lists the error messages and other warnings displayed in the monitor, as well as the solutions for dealing with them. Display Description Solution O (blinks) Clock not set. Set clock. B Battery running low. Prepare to charge or change battery. N Battery exhausted. Battery exhausted. Recharge or replace with a fullycharged battery. P Battery temperature high Battery temperature is high. Turn off camera, and allow battery to cool down before resuming use. After five seconds, this message will disappear, the monitor will turn off, and the power-on lamp will blink rapidly. After the lamp blinks for three minutes, the camera will turn off automatically, but you can also press the power switch to turn it off manually. N Memory card is write protected. Write-protect switch is in "lock" position. Slide write-protect switch to "write" position. P This card cannot be used. P This card cannot be read. Error accessing memory card. • Use an approved card. • Check that connectors are clean. • Confirm that memory card is correctly inserted. A 162 16, 18 16, 18 17 23 178 22 22 P Card is not formatted. Format card? No Memory card has not been formatted for use in COOLPIX P6000. Choose Yes and press the k button to format card. 23 Yes N Out of memory. Memory card is full. • Choose lower image quality or smaller image size. • Delete pictures or sound files. • Insert new memory card. • Remove memory card and use internal memory. 124, 126 30, 84, 88, 156 22 22 Technical Notes 185