Nikon P6000 P6000 User's Manual - Page 33

5 The battery begins charging. • The power-on lamp and AF lamp will blink, and the battery will start charging. • The power-on lamp and AF lamp will stop blinking when charging is complete. • A fully-exhausted battery will charge in about three hours. Charging the Battery First Steps The following chart explains camera status while the AC adapter is connected to the camera. Camera Status Description The power-on lamp and AF lamp will blink Battery charging. The power-on lamp and AF lamp will turn off The power-on lamp or the monitor will turn on. Battery fully charged. The camera is on. Power is supplied to the camera by the AC adapter. The flash lamp will flickers • The temperature is not suitable for usage. Use the charger in a room with a surrounding temperature range of 5 to 35 °C (41 to 95 °F) to charge the battery. • If the lamp flickers rapidly, the AC adapter is not correctly inserted or the battery is faulty. Reinsert the AC adapter or replace the battery. 6 Disconnect the camera and AC adapter when charging is complete. • Turn off the camera. • Pull out the AC adapter from the camera, and the power cable from the power outlet. B Note on the AC Adapter • Be sure to read and follow the warnings and cautions of "For Your Safety" (Aiii), before using the AC adapter. • Be sure to read and follow the warnings for "The Battery" (A183) of the section "Caring for the Camera", before using the battery. • Do not, under any circumstances, use another make or model of AC adapter. Failure to observe this precaution could result in overheating or in damage to the camera. • Only use the power cable for the AC Adapter EH-66 (supplied). D Charging the Battery with the Battery Charger The Battery Charger MH-61 (A177), for EN-EL5 is available separately. 19