Netgear UTM5EW-100NAS Reference Manual - Page 96

ProSecure Unified Threat Management (UTM) Appliance Reference Manual Table 4-1. VLAN Profile Settings (continued) Setting Description (or Subfield and Description) Enable LDAP information (continued) Search Base port The search objects that specify the location in the directory tree from which the LDAP search begin. You can specify multiple search object, separated by commas. The search objects include: • cn (for common name) • ou (for organizational unit) • o (for organization) • c (for country) • dc (for domain) For example, to search the Netgear.net domain for all last names of Johnson, you would enter: cn=Johnson,dc=Netgear,dc=net The port number for the LDAP server. The default setting is zero. DNS Proxy Enable DNS Proxy This is optional. Select the Enable DNS Proxy radio button to enable the UTM to provide a LAN IP address for DNS address name resolution. This setting is disabled by default. Note: When you deselect the Enable DNS Proxy radio button, the UTM still services DNS requests that are sent to its LAN IP address unless you disable DNS Proxy in the firewall settings (see "Attack Checks" on page 5-27). Inter VLAN Routing Enable Inter VLAN Routing This is optional. Select the Enable Inter VLAN Routing radio button to ensure that traffic is routed only to VLANs for which inter VLAN routing is enabled. This setting is disabled by default. When the Enable Inter VLAN Routing radio button is deselected, traffic from this VLAN is not routed to other VLANs, and traffic from other VLANs is not routed to this VLAN. 4. Click Apply to save your settings. Note: Once you have completed the LAN setup, all outbound traffic is allowed and all inbound traffic is discarded except responses to requests from the LAN side. To change these default traffic rules, see Chapter 5, "Firewall Protection." 4-10 v1.0, January 2010 LAN Configuration