Netgear UTM5EW-100NAS Reference Manual - Page 107

ProSecure Unified Threat Management (UTM) Appliance Reference Manual Table 4-3. DMZ Setup Settings (continued) Setting Description (or Subfield and Description) Enable DHCP Server Primary DNS (continued) Server This is optional. If an IP address is specified, the UTM provides this address as the primary DNS server IP address. If no address is specified, the UTM provides its own LAN IP address as the primary DNS server IP address. Secondary DNS Server This is optional. If an IP address is specified, the UTM provides this address as the secondary DNS server IP address. WINS Server This is optional. Enter a WINS server IP address to specify the Windows NetBios Server IP if one is present in your network. Lease Time Enter a lease time. This specifies the duration for which IP addresses is leased to clients. DHCP Relay Select the DHCP Relay radio button to use the UTM as a DHCP relay agent for a DHCP server somewhere else on your network. Enter the following setting: Relay Gateway The IP address of the DHCP server for which the UTM serves as a relay. Enable LDAP information Select the Enable LDAP information checkbox to enable the DHCP server to provide Lightweight Directory Access Protocol (LDAP) server information. Enter the following settings: LDAP Server The IP address or name of the LDAP sever. Search Base The search objects that specify the location in the directory tree from which the LDAP search begin. You can specify multiple search object, separated by commas. The search objects include: • cn (for common name) • ou (for organizational unit) • o (for organization) • c (for country) • dc (for domain) For example, to search the in Netgear.net domain for all last names of Johnson, you would enter: cn=Johnson,dc=Netgear,dc=net port The port number for the LDAP server. The default setting is zero. LAN Configuration v1.0, January 2010 4-21