Home » Netgear Manuals » Hubs & Switches » Netgear GS750E » Manual Viewer

Netgear GS750E User Manual - Page 81

Table 1. Factory default settings Continued, Setting, Feature, Enabled, Power saving mode

Add to My Manuals
Save this manual to your list of manuals

Page 81 highlights

Table 1. Factory default settings (Continued) Feature Setting Power saving mode Enabled Switch Management mode Web browser and ProSAFE Plus Utility Bonjour Enabled Auto-DoS mode Enabled 81

Section	Page
Contents	3
1. Get Started	5
Safety Instructions and Warnings	6
Configure the Switch	8
Access the Switch Using a Web Browser	9
Access a Switch That Is Connected to a Network	9
Access a Switch That Is Off-Network	10
Access the Switch With the ProSAFE Plus Utility	11
Install the ProSAFE Plus Utility	11
Access and Configure the Switch Using the ProSAFE Plus Utility	12
Use the NETGEAR Switch Discovery Tool to Access the Switch	13
Use the NETGEAR Insight Mobile App to Discover the Switch	14
Access the Switch From a Mac Using Bonjour	15
Change the Switch Password	16
Change the Language of the Local Browser Interface	17
Register Your Product	18
2. Use VLANS for Traffic Segmentation	19
VLAN Overview	20
Create Basic Port-Based VLANs	20
Assign Ports to Multiple Port-Based VLANs	22
Create 802.1Q-Based VLANs in a Basic Configuration	23
Create 802.1Q-Based VLANs in an Advanced Configuration	25
Add Tagged or Untagged Ports to an 802.1Q-Based VLAN	27
Specify a Port PVID for an 802.1Q-Based VLAN	28
Manage the Voice VLAN	30
Specify the Voice VLAN Properties	30
Enable the Voice VLAN Mode for Ports	31
Manage the OUI Table	32
3. Optimize Performance With Quality of Service	35
Enable 802.1p/DSCP-Based Quality of Service	36
Configure Port-Based Quality of Service	37
Set Up Rate Limiting	38
Set Up Broadcast Filtering	39
4. Manage Security	42
Manage Access Control	43
Add Devices to the Access Control Table	43
Remove Devices From the Access Control Table	44
Set the Switch Management Mode	45
Disable Bonjour for Discovery	46
Manage the Auto Denial of Service Prevention Mode	47
5. Manage Network Settings	49
Specify IP Address Settings for the Switch	50
Use Browser-Based Access to Specify the Switch IP Address	50
Use the ProSAFE Plus Utility to Specify the Switch IP Address	51
Manage Multicast Traffic With IGMP Snooping	52
Customize IGMP Snooping	53
Specify a VLAN for IGMP Snooping	54
Enable the Auto-Video Configuration	56
Set Up Link Aggregation	56
Set Up a Static Link Aggregation Group	57
Set Up a Link Aggregation Control Protocol Group	58
Set Up the LACP System Priority for the Switch	60
Set Up LACP Port Priority and Time-Out Values	61
6. Manage and Monitor the Switch	63
Manage Flow Control	64
Manage the Port Speed and the Port Status	65
Enable Loop Prevention	66
Manage Power Saving Options	67
Manually Download and Upgrade the Firmware	69
Reboot the Switch	70
Save the Switch Configuration	70
Restore a Saved Switch Configuration	71
Restore Factory Default Settings	72
Enable Port Mirroring	73
View Switch Information or Change the Switch Device Name	74
View or Clear the Port Statistics	75
7. Diagnostics and Troubleshooting	77
Test Cable Connections	78
Resolve a Subnet Conflict to Access the Switch	79