Marantz SR7015 Owners Manual English - Page 197

Contents Connections Playback Audyssey® Set Audyssey MultEQ® XT32, Audyssey Dynamic EQ®, Audyssey Dynamic Volume® and Audyssey LFC™. These can be selected after Audyssey® Setup has been performed. For additional information on Audyssey technology, please see "Explanation of terms" (v p. 325). 0 "MultEQ® XT32", "Dynamic EQ", "Reference Level Offset", "Dynamic Volume", "Audyssey LFC™" and "Containment Amount" settings are stored for each input source. 0 When the sound mode is in the "Direct" or "Pure Direct" mode, "MultEQ® XT32", "Dynamic EQ", "Dynamic Volume" and "Audyssey LFC™" settings cannot be configured. 0 When the sound mode is in "DTS Virtual:X" or sound mode that have "+Virtual:X" in the sound mode name, "Dynamic EQ", "Dynamic Volume" and "Audyssey LFC™" settings cannot be configured. 0 This cannot be set when the input mode is set to "7.1CH IN". 0 This item cannot be selected when a DTS:X format with a sampling frequency of over 48 kHz is input. 0 "MultEQ® XT32", "Dynamic EQ", "Dynamic Volume" and "Audyssey LFC™" cannot be selected when a DTS:X format with a sampling frequency of over 48 kHz is input. Settings Tips Appendix o MultEQ® XT32 MultEQ® XT32 compensates for both time and frequency characteristics of the listening area based on Audyssey® Setup measurement results. Selection is done from three types of compensation curves. We recommend the "Reference" setting. Reference (Default): L/R Bypass: Flat: Off: Selects the default calibrated setting with a slight roll off at high frequencies, which is optimized for movies. Selects the reference setting, but bypasses MultEQ® XT32 on the front left and right speakers. Selects the calibrated setting which is optimized for small rooms where your listening position is closer to the speakers. Do not use "MultEQ® XT32". 0 When using headphones, "MultEQ® XT32" is automatically set to "Off". Front panel Display Rear panel 197 Remote Index