LiftMaster LMSC1000 Instructions Manual - English French Spanish

LMHNTG

FC: 24

ID: 00025

Remove permit while vehicle is in motion.

07/18

07/18

FC: 24

ID: 000025

FC: 24

ID: 000025

LMUNTG Windshield/Headlamp Tag

LiftMaster Vehicle RFID Tags

LMHNTG Hang Tag and LMUNTG LiftMaster Dual-

Purpose Vehicle RFID Tag (Windshield/Headlamp)

UHF RFID Tag Mounting Instructions

LiftMaster Proprietary RFID Tags must be used with LiftMaster RFID Long

Range Reader (LMSC1000). The tags are high performance radio frequency

identification devices. They have been designed to be installed on the

interior (LMHNTG/SPLMHNTG LiftMaster RFID Hang Tag and LMUNTG/

SPLMUNTG LiftMaster Dual-Purpose RFID Tag [Windshield/Headlamp])

or exterior of the vehicle (LMUNTG/SPLMUNTG LiftMaster Dual-Purpose

RFID Tag [Windshield/Headlamp]). LMUNTG Tag can be installed on

surfaces that are made of glass, plastic or fiberglass. When mounted on

the windshield, these tags are designed to not interfere with the vision of

the driver. Installation of the LMUNTG is critical, as when installed properly

the tags are designed to not interfere or obstruct the headlamp’s beam

per United States DOT specifications. Additionally, the LMUNTG offers

an unmatched level of security as their design does not allow them to be

removed or transferred once mounted to the vehicle.

All LiftMaster tags have been tested to withstand a variety of environmental

conditions such as UV exposure, vibration, temperature and humidity

cycles. Tags have been engineered for the rigors of automotive use, but

handle carefully during installation process.

NOTE:

Please consult your local and state vehicle ordinances to determine

the allowable mounting locations for this type of tag. Due to the wide

variance in windshield design, this document is intended as a general guide

and not inclusive of all vehicle makes and models. This document serves to

supply only general guidelines for the correct handling and installation of

tags.

NOTE:

If the facility code is not visible on the tag it will be “000”.

*If specific Facility Code and Start

ID are required, use special part #s

SPLMHNTG, SPLMUNTG.

Choosing a Proper Tag Mounting Location

For optimum performance, the LMUNTG/SPLMUNTG LiftMaster Dual-Purpose RFID Tag (Windshield/Headlamp) must be installed on a windshield location

or other suitable mounting point that is facing the RFID reader during normal driving. Hang Tags (LMHNTG) should be attached to your rear view mirror for

best results.

LMHNTG/SPLMHNTG*

LiftMaster RFID Hang Tag

LMUNTG/SPLMUNTG

LiftMaster Dual-Purpose RFID

Tag (Windshield/Headlamp)

WARNING:

This product can expose you to chemicals including

lead, which are known to the State of California to cause cancer or

birth defects or other reproductive harm. For more information go

to

www.P65Warnings.ca.gov

NOTE:

Use LMHNTG for rear view mirror tag location and LMUNTG for all other tag locations.

Reader

Tag not

read

Tag Read

Zone

Tag not

read

Preferred Tag

Locations

Preferred Tag

Locations

Preferred Tag

Locations

Reader

Reader

Tag Read

Zone

Tag Read

Zone

Correct Driver Side

Reader Placement

Correct Overhead

Reader Placement

Correct Passenger Side

Reader Placement