LiftMaster CSL24UL Installation Manual - Page 22

Step 9 Install the cover, To Lock the Access Door

Get LiftMaster CSL24UL PDF manuals and user guides View all LiftMaster CSL24UL manuals
Add to My Manuals
Save this manual to your list of manuals

Page 22 highlights

INSTALLATION Step 9 Install the cover Before installing the cover, follow the instructions in the Adjustment section to adjust the limits and force. The operator cover consists of two pieces: a rear cover and a front cover. The front cover can easily be removed to access the electrical box. To access the reset switch slide the access door up. The front cover and access door can be locked with the key. 1. Align the tabs on the rear cover with the slots on the chassis and place the cover over the operator. 2. Secure both sides of the rear cover to the chassis with two 5/16-18 lead in screws. 3. Align the front cover with the back cover, making sure the grooves line up. 4. Secure the front cover to the chassis with two 5/16-18 lead in screws. 5. Secure the front cover to the rear cover using the 5/16-18 lead in screw. To Lock the Access Door From the factory the access door for the reset switch will not be locked. To lock the access door follow the steps below: 1. Locate the lock tab on the back of the front cover and remove the screw securing the tab to the cover. 2. Turn the tab 180 degrees, then secure with the screw. The access door can now be locked. The basic installation is complete. 22

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
22
Step 9 Install the cover
Before installing the cover, follow the instructions in the Adjustment section to adjust the limits and force.
The operator cover consists of two pieces: a rear cover and a front cover. The front cover can easily be removed to access the electrical box. To access the
reset switch slide the access door up. The front cover and access door can be locked with the key.
1.
Align the tabs on the rear cover with the slots on the chassis and
place the cover over the operator.
2.
Secure both sides of the rear cover to the chassis with two 5/16-18
lead in screws.
3.
Align the front cover with the back cover, making sure the grooves
line up.
4.
Secure the front cover to the chassis with two 5/16-18 lead in
screws.
5.
Secure the front cover to the rear cover using the 5/16-18 lead in
screw.
To Lock the Access Door
From the factory the access door for the reset switch will not be locked.
To lock the access door follow the steps below:
1.
Locate the lock tab on the back of the front cover and remove the
screw securing the tab to the cover.
2.
Turn the tab 180 degrees, then secure with the screw. The access
door can now be locked.
The basic installation is complete.
INSTALLATION