Kenwood TM-D700A User Manual 1 - Page 71
Display Dimmer, Auto Dimmer Change, Display Contrast Adjust, Positive/ Negative Reversal
View all Kenwood TM-D700A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
DISPLAY DIMMER You can manually change the display illumination to suit the lighting conditions where you are operating. 1 Press [F], [DIM]. • The current illumination level appears and blinks; The default is level 1. DISPLAY CONTRAST ADJUST The display visibility changes depending on ambient conditions, for example between daytime and nighttime. When you find the display is not clear, use this function to select the optimum display contrast. Access Menu 1-1-2 (CONTRAST) and select from levels 1 to 16. The default is level 8. 2 Press [c]/ [d] to select from 5 levels, including OFF. 3 Press [OK] to complete the setting. Note: Selecting OFF automatically switches Auto Dimmer Change ON. AUTO DIMMER CHANGE This function increases the display intensity one step brighter for approximately 5 seconds when you press a front panel button or Mic key, or turn the Tuning control. No change occurs if you have selected the brightest level. Access Menu 1-1-4 (AUTO DIMMER) and select "ON". Note: The display contrast may be affected by a change in temperature. Adjust the contrast as necessary. POSITIVE/ NEGATIVE REVERSAL You can change the display status between Negative and Positive (default) using Menu 1-1-3 (REVERSE 14 MODE). 65