Kenwood TM-D700A User Manual 1 - Page 69
Auxiliary Functions
![]() |
View all Kenwood TM-D700A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
AUXILIARY FUNCTIONS DIRECT FREQUENCY ENTRY (WITH MC-53DM ONLY) If the desired operating frequency is far from the current frequency, using the Mic keypad is the quickest way to change frequency. First program one of the Mic PF keys as the ENTER key {page 62}, 1 Press the left or right [BAND SEL] to select band A or B. • If necessary, press [F], then the same [BAND SEL] to recall the sub-band. 2 Press [VFO]. 3 Press Mic [ENTER]. • The display for Direct Frequency Entry appears. If you press Mic [VFO] while entering a frequency, the new data is accepted for the digits entered and the previous data remains unchanged for the digits not yet entered. Previous freq.: 145.350 MHz Note: The 1 kHz and subsequent digits may be corrected depending on combinations of the previous frequency and the current frequency step size. If you press Mic [ENTER] while entering a frequency, the new data is accepted for the digits entered and 0 is programmed for the digits not yet entered. Previous freq.: 145.350 MHz 14 4 Press the numeric keys in sequence on the keypad. Note: x The 1 kHz and subsequent digits are corrected according to which key is pressed for the 1 kHz digit. x Entering a digit that is outside the allowable range causes the nearest digit within range to be displayed. x You cannot enter a frequency in a band which cannot be recalled on the current band. 63
![](/manual_guide/products/kenwood-tmd700a-user-manual-c2ebc0d/69.png)