Invacare IFX-20R Owners Manual 1 - Page 57
The sleep mode, Operating powered seating functions
View all Invacare IFX-20R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
If you do not apply the unlock sequence or the ON/OFF button is pressed again before the unlock sequence is complete, the system returns to the locked state and powers down. 6.13 The sleep mode The sleep mode is not set at the factory, but can be enabled by your provider. If this parameter is set ON, the system goes into sleep mode after a period of time without user activity. This period can be set by the provider. Before a system goes into sleep mode, the system enters a transition period. During the transition period, the touch display and all indicators slowly dim until they are switched off. During this transition period sleep mode can be interrupted by performing any input by moving the joystick, pressing the ON/OFF button or tapping on the touch display. To wake the system from sleep mode, move the joystick or either press the ON/OFF button, if this parameter has been enabled by your provider. 6.14 Operating powered seating functions Powered seating functions, such as powered elevating legrests or powered recline, are carried out as described below. Usage 6.14.1 Through seating screens By default, every seating screen displays a single powered seating function. Different configurations are listed below. Contact your provider to change the configuration. 60126082-A 57