Intermec CV30 CV30 Fixed Mount Computer With Windows CE User's Manual - Page 56
Validate Server Certificate, Server Common Name
View all Intermec CV30 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
Chapter 3 - Configuring the CV30 a For Prompt for Credentials, choose Enter credentials now. Note: You can use Prompt for credentials to troubleshoot your connection to the network if you have problems. By choosing Enter credentials now, you are storing the user name and password on the device so that you will not need to enter it every time. b Select User name and type your user name. c Select User Password and type a user password. d For Validate Server Certificate, choose Yes. Note: You must have the date on the CV30 set correctly when you enable Validate Server Certificate. If you choose TLS: a Load a user and root certificate on your CV30. For help, see "Loading a Certificate" on page 62. b For Validate Server Certificate, choose Yes. c You must enter a User Name and Subject Name. You can also enter a Server Common Name if you want to increase your level of security. 6 Save your settings. To enable WPA-PSK or WPA2-PSK with Funk security 1 Open Intermec Settings. 2 Make sure you have configured the communications parameters and selected Funk as your security choice. 3 Choose Communications > 802.11 Radio > Funk Security > Profile. 4 For Association, choose WPA or WPA2. 5 For 8021x, choose None. 6 For Pre-Shared Key, enter the pre-shared key or the passphrase. 46 CV30 Fixed Mount Computer With Windows CE User's Manual