Intermec CV30 CV30 Fixed Mount Computer With Windows CE User's Manual - Page 26
Increasing Memory Storage, ASCII, Scanner model, Save Settings, Power
View all Intermec CV30 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Chapter 1 - Using the CV30 Fixed Mount Computer If you are configuring an ASCII scanner, you need to select ASCII from the Scanner model list and then configure the scanner port settings to match the scanner after Intermec Settings refreshes. Note: If you are attaching a 1470 scanner, you need to configure it as an ASCII scanner and set the appropriate scanner port settings (38400 baud, 8 data bits, no parity, 1 stop bit). ''''' 7 Tap File > Save Settings or to the disk icon ( ). Depending on the scanner you are attaching, you may hear a series of beeps and the Good Read light may flash. You are now ready to use the scanner. Increasing Memory Storage You can use an SD card to increase file storage and install software.The CV30 currently supports SD cards that hold up to 2 GB of information. The SD card slot is located on the top of the CV30 under the top cover. You must remove the top cover to access the SD card slot. To insert an SD card 1 Press Power to suspend the CV30. 2 Unscrew the six Phillips head screws from the top cover and remove the cover. Make sure you keep all of the screws. 16 CV30 Fixed Mount Computer With Windows CE User's Manual