Intermec CV30 CV30 Fixed Mount Computer With Windows CE User's Manual - Page 20
Using the Power Button to Reset the CV30, Troubleshooting the, Boot Process Clean Booting
View all Intermec CV30 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Chapter 1 - Using the CV30 Fixed Mount Computer • Using the Reset button If you try both of the following options to reset the CV30 and you cannot restore system operation, you may need to perform a clean boot. For more information, see "Troubleshooting the Boot Process (Clean Booting)" on page 89. Using the Power Button to Reset the CV30 Intermec recommends pressing and holding the Power button as the preferred method to reset the CV30. This method performs a graceful system shutdown and preserves your data through the process. To reset the CV30 using the Power button • Press and hold the Power button for 5 seconds. The CV30 systematically shuts down, restarts, and goes through the initialization process. Using the Reset Button to Reset the CV30 If performing the preferred reset method of using the Power button does not restore system operation, it may be necessary to use the Reset button. Unfortunately, using this method to reset the CV30 cannot guarantee that cached disk data will be saved, and transactional data may be lost during the reset. To reset the CV30 using the Reset button • Using a small pointed device (such as the end of the stylus), press the Reset switch on the top of the CV30. Reset 802.11 . Do not use force or a sharp object when pressing the reset button. You may damage the reset button. 10 CV30 Fixed Mount Computer With Windows CE User's Manual