HP XP P9500 HP P9000 Business Continuity Manager Reference Guide (T5253-96058, - Page 79

because Business Continuity Manager cannot perform copy pair operations, if you change the definitions of the items that require the YKMAKE or YKRESYNC command to make changes, the changes will not be applied to the storage system settings. Table 56 Contents of the Copy Group Attributes Panel Item Linkage Option Description Copy type Displays the linkage option. CA • HS: This is a CA copy group with the HyperSwap attribute. • NNE: This is something other than the above. For PPRC copy pairs in a 2DC configuration with HyperSwap and CAJ, specify HS. If this is a CA copy group created by executing the YKH2B command, HS is displayed. If HS is displayed, Business Continuity Manager can only be used for monitoring, and cannot perform any operations.1 When effective --2 C/T ID Specify the C/T group ID (required BC for TCA). CA Specify a hexadecimal number between 00 and 7F. This value CAA depends on the type of storage system. This option cannot be specified for CA copy groups with the HyperSwap attribute. When the YKMAKE command is executed.3 C/T ID (JNLG) Specify the journal group number CAJ of the primary site as a C/T group ID (required) Specify a value between OO and FF. When the YKMAKE command is executed.3 sub C/T ID (JNLG) Specify the journal group number CAJ of the secondary site as a sub C/T group ID (required) Specify a value between OO and FF. NOTE: For configurations that use delta resync, specify the same value for both the UR copy pair and the UR copy pair for delta resync. When the YKMAKE command is executed.3 MIRROR ID Specify the Mirror ID in the range CAJ from 0 to 3 (required for CAJ). 4 When the YKMAKE command is executed.1 Discover/Define Configuration Panel (Configuration File Definition) 79