HP XP P9500 HP P9000 Business Continuity Manager Reference Guide (T5253-96058, - Page 171

Table 91 Contents of the Logical Path Status of Copy Group Pair Panel Item Copy Group ID Type Description Copy group ID Path type • CU: Inter-control unit logical path • DKC: Inter-disk controller logical path Primary S/N PathID Primary storage system serial number Primary path ID When the path type is CU, nothing is displayed. Secondary CU SSID S/N PathID Primary control unit number Primary SSID Secondary storage system serial number Secondary path ID When the path type is CU, nothing is displayed. CU SSID Primary Dir Secondary Status Secondary control unit number Secondary SSID Primary port number Path direction Secondary port number Status of each physical path • ESTABLISHED: The physical path has been established. • INIT FAILED: Initialization failed. • NO RESOURCES AT PRI: The port for the primary storage system is invalid. • NO RESOURCES AT SEC: The port for the secondary storage system is invalid. • SERIAL# MISMATCH: The storage system serial numbers do not match. • CONFIG ERROR: The interface ID is invalid. Confirmation Panels This section explains panels that are displayed to check the execution of each operation. Confirm Execution Dissolve Panel If d is specified in AC in the Manage Copy Groups panel, the Confirm Execution Dissolve panel is displayed, prompting you to confirm whether the copy pair is dissolved. Figure 135 (page 172) shows the Confirm Execution Dissolve panel. Confirmation Panels 171