HP EliteOne 700 Maintenance & Service Guide - Page 94
Card reader board
View all HP EliteOne 700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
Card reader board The card reader board is located on the right side of the system board. You must remove the system board before you can remove the card reader board. The card reader board is secured with two screws. To remove the card reader board: 1. Prepare the computer for disassembly (see Preparing to disassemble the computer on page 27). 2. Remove the stand (see Stand on page 29). 3. Remove the access panel (see Access panel on page 33). 4. Remove the ride side panel (see Side panels on page 76). 5. Remove the lower rear panel (see Lower rear panel on page 59). 6. Remove the VESA mounting plate (see VESA mounting plate on page 72). 7. Remove the memory modules (see Memory on page 44). 8. Remove the processor heat sink (see Heat sink on page 51). 9. Remove the processor (see Processor on page 53). 10. Remove the WLAN module (see WLAN module on page 49). 11. Remove the system board (see System board on page 78). 12. Remove the two Phillips screws that secure the board to the system board. 13. Position the system board upright with the right side toward you. 84 Chapter 5 Removal and Replacement Procedures ENWW