HP AJ732A Cisco MDS 9500 Series Hardware Installation Guide (OL-17467-02, Octo - Page 234
Environmental and Power Requirements Specifications for Cisco 10-Gbps Ethernet X2 Transceiver
UPC - 883585789481
View all HP AJ732A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 234 highlights
SFP and SFP+ Transceiver Specifications Appendix D Technical Specifications Send documentation comments to [email protected]. Environmental and Power Requirements Specifications for Cisco 10-Gbps Ethernet X2 Transceiver Table D-25 provides the power requirement specifications for the Cisco 10-Gbps Ethernet X2 transceiver. Table D-25 Power Requirement Specification for Cisco 10-Gbps Ethernet X2 Transceivers Average Transmit Power (dBm) X2 Maximum Minimum DS-X2-E10G-SR -1.2 -7.3 Average Receive Power (dBm) Maximum Minimum -1.0 -9.9 Fiber Loss Budget (dBm) 2.6 (50.0 micron-OM3) Table D-26 provides the environmental specifications for the Cisco 10-Gbps Ethernet X2 transceivers. Table D-26 Environmental Specifications for Cisco 10-Gbps Ethernet X2 Transceiver X2 DS-X2-E10G-SR Operating Maximum 40°C Minimum 0°C Storage Maximum 85°C Minimum -40°C For information about safety, regulatory, and standards compliance, refer to the Regulatory Compliance and Safety Information for the Cisco MDS 9000 Family. Cisco 10-Gbps Ethernet DWDM X2 Transceiver The Cisco 10-Gbps Ethernet DWDM X2 Transceiver pluggable module (DWDM-X2-xx.xx=) provides high-performance Fibre Channel connectivity for the Cisco MDS 9000 family 10-Gbps Fibre Channel switching module to an existing Ethernet DWDM infrastructure. The data format transmitted by the Ethernet DWDM X2 transceiver on the fiber is identical to that transmitted by the Fibre Channel X2 transceiver, except that the Fibre Channel packets are clocked at the 10-Gigabit Ethernet rate. The main features of the Cisco 10-Gbps Ethernet DWDM X2 Transceiver include: • Support for 32 nontunable ITU 100-GHz wavelengths compatible with the Cisco ONS DWDM channel plan. • Support for digital optical monitoring capability. For more information, refer to the data sheet at: http://www.cisco.com/en/US/products/ps6576/index.html SFP and SFP+ Transceiver Specifications The Cisco MDS 9500 Series is compatible with SFP and SFP+ transceivers and cables that have LC connectors. The wavelength of each transceiver must match the transceiver on the other end of the cable, and the cable must not exceed the stipulated cable length for reliable communications. Cisco SFP and SFP+ transceivers provide the uplink interfaces, laser transmit (TX) and laser receive (RX), and support 850 to 1610 nm nominal wavelengths, depending upon the transceiver. D-22 Cisco MDS 9500 Series Hardware Installation Guide OL-17467-02