Epson WorkForce Pro WF-M5899 Users Guide - Page 66
WPA PSK TKIP/AES; also known as WPA Personal
![]() |
View all Epson WorkForce Pro WF-M5899 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
Error code and message Solution E-5 Security mode (e.g. WEP, WPA) does not match the current setting of the printer. Confirm security mode, and contact the network administrator for assistance. If the security on your router or access point is not one of the following types, change the type of security on your router or access point and reset your product's network settings. • WEP-64 bit (40 bit) • WEP-128 bit (104 bit) • WPA PSK (TKIP/AES); also known as WPA Personal • WPA2 PSK (TKIP/AES); also known as WPA2 Personal • WPA (TKIP/AES) • WPA2 (TKIP/AES) • WPA3-SAE (AES) • WPA2/WPA3-Enterprise Latin America: Also make sure you are connecting to the 2.4GHz band on your network and using the password for that band. E-6 If your router or access point has MAC address filtering MAC address of your printer may be filtered. Check whether your router/access point has restrictions such as MAC address filtering. See the documentation of the enabled, register your product's MAC address so it is not filtered. Locate the MAC address on the network connection report and check your router or access point documentation for instructions. router/access point or contact your network If your router or access point is using shared administrator for assistance. authentication with WEP security, confirm that you are using the correct authentication key and index. If your router or access point limits the number of connected devices, raise the connection limit. See your router or access point documentation for instructions. 66
![](/manual_guide/products/epson-workforce-pro-wfm5899-users-guide-8af0888/66.png)