Epson WorkForce Pro WF-M5899 Users Guide - Page 166
Setting Up a WSD Port (Windows 7/Windows Vista
![]() |
View all Epson WorkForce Pro WF-M5899 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 166 highlights
7. Select Presets to save your scan settings. Note: Presets can be locked by an administrator. If you cannot access or change this setting, contact your administrator for assistance. 8. Select Upload. Your product scans your original and saves the scanned file to the selected destination. Parent topic: Starting a Scan Using the Product Control Panel Setting Up a WSD Port (Windows 7/Windows Vista) You can scan to a networked Windows computer using WSD (Web Services for Devices). You must first set up a WSD port on your Windows 7 or Windows Vista system (the port is set up automatically on Windows 11, Windows 10 and Windows 8.x). Before you set up a WSD port, make sure you installed your product software, and connected your product and computer to the same network. 1. Turn on your product. 2. Print a network status sheet so you can identify the network name and model name for your product on the network. 3. Click or Start and select Computer. 4. On the left side of the window, select Network. 5. Locate your product on the Network screen, right-click it, and select Install. 6. When you see the User Account Control screen, click Continue. Note: If you see an Uninstall screen, click Uninstall and repeat these steps as necessary. 7. When you see the message Your device is ready to use in the Windows taskbar, click the message. 8. On the Driver Software Installation screen, make sure your product is listed as Ready to use. Then click Close. 9. Do one of the following: • Windows 7: Click and select Devices and Printers. • Windows Vista: Click Start and select Control Panel > Hardware and Sound > Printers. 166
![](/manual_guide/products/epson-workforce-pro-wfm5899-users-guide-8af0888/166.png)