Epson TM-U220 TM-U220 Technical Reference Guide - Page 83
Removing a Paper Jam, Autocutter Jam
View all Epson TM-U220 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
4.2 Removing a Paper Jam TM-U220 Technical Reference Guide CAUTION: Be sure not to touch the manual cutter. Otherwise your finger might be injured. 1. Turn the power off. 2. Open the roll paper cover by using the tab, as shown in the below illustration. 3. If you have a Type A printer, remove the take-up spool and open the unit by using the unit open lever, as shown in the illustration. Roll paper cover Tab lever 1. open the roll paper cover 2. (only type A) open the unit 4. Remove the jammed paper. Note: When you turn the power off by mistake during the printing operation, the cutter blade may stop in the paper feed line. So the paper may not be fed in the first operation normally when you turn the power on. If the phenomenon happens again after removing the jammed paper, try the solution "Autocutter Jam" (page 4-3). 4.3 Autocutter Jam If a foreign object such as a push pin or paper clip drops in the autocutter and causes the auto cutter to lock up, the printer enters an error state and begins the recovery operation automatically. If the problem is not serious, the autocutter returns to its normal position without any intervention by the user. If the autocutter does not return to its normal position by itself, follow the steps below to fix the problem: 1. Open the roll paper cover, and remove the jammed object if there is one. Rev. H Troubleshooting 4-3