Epson LightScene EV-100 Installation Manual for Lighting Track Mounts ELPMB54W - Page 17
Installing the Safety Wire
 |
View all Epson LightScene EV-100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Installation Procedure Installing the Safety Wire Install the safety wire supplied to the projector to prevent the projector from falling. Caution Attach the wire firmly so that it cannot come loose. a Attach the wire hook mount supplied with the projector to the ceiling. c • When installing the wire hook mount, use commercially available wood screws with a nominal diameter of 3.8 mm (0.15 inch). • Make sure that the wood screws enter at least 20 mm (0.8 inch) into the ceiling's underlay. b Loosen the carabiner for the safety wire supplied with the projector. c Insert the loosened carabiner through the hole in the plate unit, and then tighten it. 16
-
1 -
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12 -
13 -
14 -
15 -
16 -
17 -
18 -
19 -
20
 |
 |
Installation Procedure
16
Installing the Safety Wire
Install the safety wire supplied to the projector to prevent the projector from falling.
Caution
Attach the wire firmly so that it cannot come loose.
a
Attach the wire hook mount supplied with the projector to the ceiling.
c
•
When installing the wire hook mount, use commercially available wood screws with a nominal
diameter of 3.8 mm (0.15 inch).
•
Make sure that the wood screws enter at least 20 mm (0.8 inch) into the ceiling's underlay.
b
Loosen the carabiner for the safety wire supplied with the projector.
c
Insert the loosened carabiner through the hole in the plate unit, and then tighten it.