Epson LightScene EV-100 Installation Manual for Lighting Track Mounts ELPMB54W - Page 14
Secure the lever for the rotating unit with the M4 x 10 mm screw x1.
View all Epson LightScene EV-100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Installation Procedure b Insert the protruding section on the rotating unit into the groove on the lighting track. c Rotate the lever of the rotating unit 90 degrees clockwise. Rotate so that the screw hole positions overlap as shown in the following image. d Secure the lever for the rotating unit with the M4 x 10 mm screw (x1). Secure using the screw removed in step 2 from "Attaching the Rotating Unit" p.8. e Secure the plate unit to the stopper unit using the M4 x 10 mm screws supplied (x2). 13
Installation Procedure
13
b
Insert the protruding section on the rotating unit into the groove on the lighting track.
c
Rotate the lever of the rotating unit 90 degrees clockwise.
Rotate so that the screw hole positions overlap as shown in the following image.
d
Secure the lever for the rotating unit with the M4 x 10 mm screw (x1).
Secure using the screw removed in step 2 from "Attaching the Rotating Unit"
p.8
.
e
Secure the plate unit to the stopper unit using the M4 x 10 mm screws supplied (x2).