Epson H5200 Service Manual - Page 94
Laser 1000/1500 Service Manual, Disassembly and Assembly
![]() |
View all Epson H5200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
Disassembly and Assembly EPL-5000/5200/Action Laser 1000/1500 Service Manual 3.2.3.10 Fusing Unit Disassembly This section describes the removing the paper exit sensor, heater lamp, cleaning, lower fusing roller, and upper fusing roller. 1. Remove the fusing unit. (Refer to Section 3.2.3.9.) 2. Remove the paper exit sensor. 3. Remove 2 CC screws (M3 x 6) for the side covers, and remove the side covers. Do not touch the glass surface of the lamp with your bare hands. I 4. Remove 2 CC screws (M3 x 6) on the heater lamp support plate, and remove the heater lamp support plate. 5. Remove the heater lamp. Paper Exit Sensor 3 /.#@- CC (M3 X 6) CC (M3 X 6) L (!9=-'B -9 Figure 3-19. Disassembling the Fusing Unit -1 on u~ Be careful not to scratch the surface of the upper jiaing roller. 6. Remove 2 CC screws (M3 x 6) on the guide plate, and remove the guide plate. 7. Remove 2 springs and 2 bushings on the cleaning roller, and remove the cleaning roller. 8. Remove 2 springs and 2 bushings on the lower fusing roller, and remove the lower fusing roller. 9. Remove 2 C-rings and 2 bushings on the upper fusing roller, and remove the upper fusing roller. CC (M3 X 6)- , Lower Fusing 7 Y A \ +"P . per'xerl -2 na CC (M3 Y P L'&.-'y' c Guide Plate / /o 9 Q . &Cleaning Roller Figure 3-20. Disassembling the Fusing Unit -2 3-16 Rev. A
![](/manual_guide/products/epson-h5200-service-manual-e7f6ffc/94.png)