Epson FX-2190IIN Users Guide - Page 26
Using the tractor in the front push position
![]() |
View all Epson FX-2190IIN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
FX-890II/FX-890IIN/FX-2190II/FX-2190IIN User's Guide 3. Press the tractor's lock tabs, tilt the tractor up, and lift it out of the printer. Using the tractor in the front push position Installing the tractor in the front push position Before installing the tractor in the front push position, remove it from its current position. If the tractor is in the rear push position, remove the sheet guide and then press the tractor's lock tabs while lifting it out. If the tractor is in the pull position, remove it following the instructions in "Removing the tractor from the pull position" on page 38. 1. Make sure the printer is turned off. If necessary, install the sheet guide on your printer as described in the supplied setup sheet. 2. If the sheet guide is installed in the front, remove it by grasping the fins on both sides and pulling the guide slightly up and away from the printer. 3. Insert the tractor into the printer's mounting slots and press down both ends of the tractor to make sure that it is firmly seated. See "Loading paper with the front push tractor" on page 27 for instructions on loading continuous paper with the front push tractor. Paper Handling 26
![](/manual_guide/products/epson-fx890ii-users-guide-5553697/26.png)