Epson ET-4700 Users Guide - Page 279
Network Interface Specifications, Power Transmitted
View all Epson ET-4700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 279 highlights
Network Interface Specifications Wi-Fi Standard Security Frequency range Maximum Radio-Frequency Power Transmitted Coordination modes IEEE 802.11 b/g/n; IEEE 802.11n available only on the 20 MHz channel WPA2-PSK (AES); complies with WPA2 with support for WPA/WPA2 Personal WEP (64/128 bit); not supported for Wi-Fi Direct mode 2.4 GHz 20 dBm (EIRP) Infrastructure mode Wi-Fi Direct (Simple AP); not supported for IEEE 802.11b Note: Wi-Fi Direct Simple AP mode available even if you connect the product to an Ethernet network. Ethernet Standard IEEE802.3i (10BASE-T); use a category 5e or higher STP (Shielded Twisted Pair) cable to prevent risk of radio interference IEEE802.3u (100BASE-TX) IEEE802.3az (Energy Efficient Ethernet); disabled by default (see link below to enable) Communication mode Connector Note: The connected device should be IEEE802.3az compliant Auto, 10Mbps Full duplex, 10Mbps Half duplex, 100Mbps Full duplex, 100Mbps Half duplex RJ-45 Security Protocol SSL/TLS: HTTPS Server/Client, IPPS Parent topic: Technical Specifications 279