Epson ET-2720 Users Guide - Page 176

Print Head Nozzle Check Product Makes Noise When It Sits for a While Your product is performing routine maintenance. This is normal. Parent topic: Solving Copying Problems Solving Paper Problems Check these sections if you have problems using paper with your product. Paper Feeding Problems Paper Jams Inside the Product Paper Ejection Problems Parent topic: Solving Problems Paper Feeding Problems If you have problems feeding paper, try these solutions: • Place the product on a flat surface. • If paper does not feed for printing, remove it. Then reload it in the middle of the rear paper feed. Slide the edge guides against the edge of the paper, making sure that the paper stack is not above the arrow mark on the edge guides. • If multiple pages feed at once, remove the paper, fan the edges to separate the sheets, and reload it. • If multiple pages feed at once during manual 2-sided printing, remove any paper from the product before reloading paper. • If paper jams when you print on both sides of the paper, try loading fewer sheets. • Make sure your paper meets the specifications for your product. • Make sure the paper size and paper type settings on the control panel are correct. • Do not place objects on the feeder guard. • For best results, follow these guidelines: • Use new, smooth, high-quality paper that is not curled, creased, old, too thin, or too thick. • Load paper in the rear paper feed printable side up. • Follow any special loading instructions that came with the paper. Parent topic: Solving Paper Problems 176