Epson ColorWorks C7500 ESC/label Command List TM-C7500 Series - Page 30
Rev.d, Sheet26
View all Epson ColorWorks C7500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Command List of the Alphabetical Order 1"Priority" indicates the function is executed with priority. Command Function identifier Command name Description Classification Command code Description of parameters Definition range for ESC/Label ^S(C MT Set auto cleaning on designated time Sets auto cleaning on Printer setting designated time (enable/disable auto cleaning on designated time or time to start auto cleaning). ^S(CMT,b,c ^S(C MV Set nozzle self-test operation Sets nozzle self-test operations (permitted clogged nozzle number, selftest interval in printing (number of labels), operation at clogged nozzle detection, or enable/disable nozzle selftest). Printer setting ^S(CMV,b,c ^S(C PC Set image correction Sets correction for image to Printer setting be printed (banding reduction , color correction mode, ink profile and brightness adjustment, enable/disable feather edge function, or ratio of black to composite). ^S(CPC,b,c ^S(C ^S(C Set LED notification This command sets whether Control panel ^S(CSL,b,c SL setting at ink cartridge low to use the LED to notify the user that ink cartridge low is occurred. Set buzzer Sets the buzzer settings for Printer setting ^S(CUB,b,c printing operations or the volume level. UB b=S: Enable/disable auto cleaning on designated time c = E/D E: Enabled D: Disabled b=T: Time to start auto cleaning c = hh:mm hh & mm are number within two digits hh = 00 to 23 mm = 00 to 59 b=C: Permitted clogged nozzle number 0 ≤ c ≤ 9999 b=I: Self-test interval in printing 0 ≤ c ≤ 99999999 (number of labels) 0: Job separator only b=O: Operation at clogged nozzle detection b=S: Enable/disable nozzle self-test b=B: Banding reduction b=C: Color correction mode c = C/N C: Continue printing N: Notify c = E/D E: Enabled D: Disabled -9999 ≤ c ≤ 9999 c = ASCII, 1 character b=D: Ink profile and brightness adjustment b=E: Enable/disable feather edge function b=P: Ratio of black to composite b=N: LED notification setting at Inkcartridge low b=S: Buzzer timing b=Z: Buzzer volume -9999 ≤ c ≤ 9999 c = E/D E: Enabled D: Disabled -9999 ≤ c ≤ 9999 c = E/D E: Enabled D: Disabled c = N/E/L N: None E: Each label L: Last label c = N/S/M/L/X N: OFF S: Soft M: Medium L: Loud X: Max TM-C7500 series Definition range c = E/D E: Enabled D: Disabled c = hh:mm hh & mm are number within two digits hh = 00 to 23 mm = 00 to 59 0 ≤ c ≤ 10 0 ≤ c ≤ 500 0: Job separator only Factory-set Corresponding ZPL II command Priority 1 initial value D 00:00 Low 6 0 Low c = C/N C C: Continue printing N: Notify c = E/D E E: Enabled D: Disabled -2 ≤ c ≤ 2 0 c = N/E N N: preferred color E: EPSON standard -6 ≤ c ≤ 4 0 Low c = E/D D E: Enabled D: Disabled -6 ≤ c ≤ 4 0 c = E/D E E: Enabled D: Disabled Low c = N/L N: None L: Last label None c = N/S/M/L/X M Low N: OFF S: Soft M: Medium L: Loud X: Max ESC/Label Command List Rev.D SHEET26