Epson ColorWorks C7500 ESC/label Command List TM-C7500 Series - Page 29

Rev.d, Sheet25

Get Epson ColorWorks C7500 PDF manuals and user guides View all Epson ColorWorks C7500 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 29 highlights

Command List of the Alphabetical Order 1"Priority" indicates the function is executed with priority. Command Function identifier Command name Description Classification Command code Description of parameters Definition range for ESC/Label Set feed operation Sets the media feed sequence Printer setting when the power is turned on or the media is changed. ^S(CMF,b,c ^S(C MF ^S(C MN Enable/disable nozzle This command sets whether Printer setting clogging recovery the automatic nozzle clogging function recovery function is enabled/disabled. Set print operation mode Sets print operations (flush onto paper mode, print operation mode, print speed, or basic printer unit system). Printer setting ^S(CMN,b,c ^S(CMP,b,c b=H: Operation at change media c = C/F/L/N/S C: Calibration F: Feed L: Measure media length N: No feed S: Short calibration b=P: Operation at power on c = C/F/L/N/S C: Calibration F: Feed L: Measure media length N: No feed S: Short calibration b=S: Enable/disable nozzle clogging recovery c = E/D E: Enabled D: Disabled b=F: flush onto paper mode b=M: Print operation mode c = 1/2 1: min.dot 2: max.cot c = T/P/R/A/C/D/F/L/U/K T: No cutting P: Manual peeling and application R: Rewind A: Automatic peeling and application C: Cutting performed D/F/L/U/K: Reserved TM-C7500 series Definition range c = F/N/S F: Feed N: No feed S: Calibration *TM-C7500 performs calibration with "S". c = F/N/S F: Feed N: No feed S: Calibration *TM-C7500 performs calibration with "S". c = E/D E: Enabled D: Disabled Factory-set Corresponding ZPL II command Priority 1 initial value F ^MF F Low ^MF E Low c = 1/2 1: min.dot 2: max.cot c = T/C T: No cutting C: Cutting performed 1 T ^MM ^S(C MP b=S: Print speed b=U: Basic printer unit system c = 1/2/3/4/5/6/8/9/10/11/12/13/14 1:25.4 [mm/sec] 2:50.8 [mm/sec] 3:76.2 [mm/sec] 4:101.6 [mm/sec] 5:127 [mm/sec] 6:152.4 [mm/sec] 8:203.2 [mm/sec] 9:220.5 [mm/sec] 10:245 [mm/sec] 11:269.5 [mm/sec] 12:304.8 [mm/sec] 13:330.2 [mm/sec] 14:355.6 [mm/sec] c = D/I/M D: Dots I: Inches M: Millimeters c = 6/12 6:152.4 [mm/sec] 12:304.8 [mm/sec] c = D/I/M D: Dots I: Inches M: Millimeters 12 Low D ^MU ESC/Label Command List Rev.D SHEET25

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
Command List of the Alphabetical Order
1
"Priority" indicates the function is executed with priority.
Definition range
Factory-set
initial value
TM-C7500 series
Corresponding ZPL II
command
Priority
1
Command
Function
identifier
Command name
Description
Classification
Command code
Description of parameters
Definition range for ESC/Label
b=H: Operation at change media
c = C/F/L/N/S
C: Calibration
F: Feed
L: Measure media length
N: No feed
S: Short calibration
c = F/N/S
F: Feed
N: No feed
S: Calibration
*TM-C7500 performs calibration with "S".
F
^MF
b=P: Operation at power on
c = C/F/L/N/S
C: Calibration
F: Feed
L: Measure media length
N: No feed
S: Short calibration
c = F/N/S
F: Feed
N: No feed
S: Calibration
*TM-C7500 performs calibration with "S".
F
^MF
^S(C
MN
Enable/disable nozzle
clogging recovery
function
This command sets whether
the automatic nozzle clogging
recovery function is
enabled/disabled.
Printer setting
^S(CMN,b,c
b=S: Enable/disable nozzle clogging
recovery
c = E/D
E: Enabled
D: Disabled
c = E/D
E: Enabled
D: Disabled
E
Low
b=F: flush onto paper mode
c = 1/2
1: min.dot
2: max.cot
c = 1/2
1: min.dot
2: max.cot
1
b=M: Print operation mode
c = T/P/R/A/C/D/F/L/U/K
T: No cutting
P: Manual peeling and application
R: Rewind
A: Automatic peeling and application
C: Cutting performed
D/F/L/U/K: Reserved
c = T/C
T: No cutting
C: Cutting performed
T
^MM
b=S: Print speed
c = 1/2/3/4/5/6/8/9/10/11/12/13/14
1:25.4 [mm/sec]
2:50.8 [mm/sec]
3:76.2 [mm/sec]
4:101.6 [mm/sec]
5:127 [mm/sec]
6:152.4 [mm/sec]
8:203.2 [mm/sec]
9:220.5 [mm/sec]
10:245 [mm/sec]
11:269.5 [mm/sec]
12:304.8 [mm/sec]
13:330.2 [mm/sec]
14:355.6 [mm/sec]
c = 6/12
6:152.4 [mm/sec]
12:304.8 [mm/sec]
12
b=U: Basic printer unit system
c = D/I/M
D: Dots
I: Inches
M: Millimeters
c = D/I/M
D: Dots
I: Inches
M: Millimeters
D
^MU
^S(CMP,b,c
Low
^S(CMF,b,c
Low
^S(C
MP
^S(C
MF
Printer setting
Printer setting
Set feed operation
Sets the media feed sequence
when the power is turned on
or the media is changed.
Set print operation
mode
Sets print operations (flush
onto paper mode, print
operation mode, print speed,
or basic printer unit system).
ESC/Label Command List
Rev.D
SHEET25