Epson ColorWorks C7500 ESC/label Command List TM-C7500 Series - Page 26

Command List of the Alphabetical Order 1"Priority" indicates the function is executed with priority. Command Function identifier Command name Description Classification Command code Description of parameters Definition range for ESC/Label ^LT ^MC ^MF ^MM Shift vertical position Sets the amount to adjust the Media position of the label's leading configuration edge. Set drawing deletion Sets deletion for the drawing Format after print canvas after printing. ^LTd ^MCe Set recover operation Sets the operation for when turning the power on and when changing the media. Printer setting ^MFo,s Set print mode Sets the printer operation for Printer setting when printing is completed. ^MMm d: Label leading edge position adjustment [dot] -9999 ≤ d ≤ 9999 e: Set/cancel drawing canvas deletion e = Y/N Y: Set N: Cancel o: Power on operation o = C/F/L/N/S C: Calibration F: Feed L: Measure media length N: No feed S: Short calibration s: Media change operation s = C/F/L/N/S C: Calibration F: Feed L: Measure media length N: No feed S: Short calibration m: Print mode m = T/P/R/A/C T: No cutting P: Manual peeling and application R: Rewind A: Automatic peeling and application C: Cutting performed TM-C7500 series Definition range -48 ≤ d ≤ 48 e = Y/N Y: Set N: Cancel o = F/N/S F: Feed N: No feed S: Calibration *TM-C7500 performs calibration with "S". s = F/N/S F: Feed N: No feed S: Calibration *TM-C7500 performs calibration with "S". m = T/C T: No cutting C: Cutting performed Factory-set Corresponding ZPL II command Priority 1 initial value ^LT Low ^MC Low ^MF Low ^MM Low ^MN ^MP ^MU ^PH ~PH Set label edge detection Sets the label edge detection Media method. configuration ^MNs Enable/disable button Enables/disables buttons. Control panel ^MPo Set units of measurement Sets the unit for specifying the rendering position and size. Printer setting ^MUu,i,o Feed to home position Feed to home position Feeds paper for 1 label. Feeds paper for 1 label. Printer control ^PH Printer control ~PH s: Label edge detection o: Disabled button u: Basic printer unit system i: Rendering resolution [dpi] o: Print resolution [dpi] None None s = N/Y/W/M N: Continuous paper (Does not detect label edge) Y, W: Gap detection M: Black mark detection o = W/F/X/M/S/E W: Disable pause button F: Disable feed button X: Disable cancel button M: Disable menu button S: Disable all buttons E: Enable all buttons u = D/I/M D: Dots I: Inches M: Millimeters i = 150/200/300/600 o = 300/600 None None s = N/Y/W/M N: Continuous paper (Does not detect label edge) Y, W: Gap detection M: Black mark detection o = W/F/X/S/E W: Disable pause button F: Disable feed button X: Disable cancel button S: Disable all buttons E: Enable all buttons u = D/I/M D: Dots I: Inches M: Millimeters i = 150/200/300/600 o = 300/600 None None ^MN Low ^MP Low ^MU Low ^PH Low ~PH High ESC/Label Command List Rev.D SHEET22