Dell S2719DGF Monitor Users Guide - Page 22

Power management modes If you have VESA's DPM compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in use. This is referred to as Power Save Mode*. If the computer detects input from the keyboard, mouse or other input devices, the monitor automatically resumes functioning. The following table shows the power consumption and signaling of this automatic power saving feature. * Zero power consumption in off mode can only be achieved by disconnecting the power cable from the monitor. S2419HGF VESA Modes Normal operation Horizontal Vertical Sync Sync Active Active Video Active Power Indicator White Active-off Inactive mode Switch off - Inactive - Blanked - White (Glowing ) Off Power Consumption 54 W (maximum) 25 W (typical) Less than 0.3 W Less than 0.3 W S2719DGF VESA Modes Normal operation Horizontal Vertical Sync Sync Active Active Video Active Power Indicator White Active-off Inactive mode Switch off - Inactive - Blanked - White (Glowing ) Off Power Consumption 85 W (maximum) 35 W (typical) Less than 0.3 W Less than 0.3 W This document is informational only and reflects laboratory performance. Your product may perform differently, depending on the software, components and peripherals you ordered and shall have no obligation to update such information. Accordingly, the customer should not rely upon this information in making decisions about electrical tolerances or otherwise. No warranty as to accuracy or completeness is expressed or implied. 22 │ About your monitor