Dell Latitude 5300 Service Manual - Page 86
Replace the single M2x4 screw that secures the eDP cable bracket to the system board [4].
View all Dell Latitude 5300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
4. Connect the cable to the connector on the system board and adhere the adhesive tape [1]. 5. Reroute the eDP cable and connect it to the eDP connector [2]. 6. Place the eDP cable bracket on the system board [3]. 7. Replace the single (M2x4) screw that secures the eDP cable bracket to the system board [4]. 86 Disassembly and reassembly
4.
Connect the cable to the connector on the system board and adhere the adhesive tape [1].
5.
Reroute the eDP cable and connect it to the eDP connector [2].
6.
Place the eDP cable bracket on the system board [3].
7.
Replace the single (M2x4) screw that secures the eDP cable bracket to the system board [4].
86
Disassembly and reassembly