Dell Latitude 5300 Service Manual - Page 71
Lift the latch and disconnect the eDP cable from the connector on the system board [4].
View all Dell Latitude 5300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
5. Peel the adhesive tape and disconnect the cable from the connector on the system board [1]. 6. Remove the single (M2x4) screw that secures the eDP bracket to the system board [2]. 7. Remove the eDP bracket away from the computer [3]. 8. Lift the latch and disconnect the eDP cable from the connector on the system board [4]. Disassembly and reassembly 71
5.
Peel the adhesive tape and disconnect the cable from the connector on the system board [1].
6.
Remove the single (M2x4) screw that secures the eDP bracket to the system board [2].
7.
Remove the eDP bracket away from the computer [3].
8.
Lift the latch and disconnect the eDP cable from the connector on the system board [4].
Disassembly and reassembly
71