Dell Latitude 5300 Service Manual - Page 76
Replace the single M2x4 screw to secure the eDP bracket to the system board [4].
View all Dell Latitude 5300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
4. Connect the cable to the connector on the system board and affix the adhesive tape [1]. 5. Connect the eDP cable to the connector on the system board [2]. 6. Place the eDP support bracket above the eDP connector [3]. 7. Replace the single (M2x4) screw to secure the eDP bracket to the system board [4]. 76 Disassembly and reassembly
4.
Connect the cable to the connector on the system board and affix the adhesive tape [1].
5.
Connect the eDP cable to the connector on the system board [2].
6.
Place the eDP support bracket above the eDP connector [3].
7.
Replace the single (M2x4) screw to secure the eDP bracket to the system board [4].
76
Disassembly and reassembly