Dell Latitude 3180 Owners Manual - Page 8

Disassembly and reassembly, Recommended tools, microSD card, Removing microSD card - drivers

Page 8 highlights

2 Disassembly and reassembly Recommended tools The procedures in this document require the following tools: • Phillips #0 screwdriver • Phillips #1 screwdriver • Plastic scribe NOTE: The #0 screw driver is for screws 0-1 and the #1 screw driver is for screws 2-4 microSD card Removing microSD card 1. Follow the procedure in Before working inside your computer. 2. Press in on the microSD card to release it from the computer. 3. Remove the microSD card from the computer. Installing microSD card 1. Slide the SD card into its slot until it clicks into place. 2. Install the microSD card. 3. Follow the procedure in After working inside your computer. Base cover Removing base cover 1. Follow the procedure in Before working inside your computer. 2. Remove the microSD card. 3. To remove the base cover: a. Loosen the M2.5x7 captive screws that secure the base cover to the computer [1, 2]. 8 Disassembly and reassembly

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51

Disassembly and reassembly
Recommended tools
The procedures in this document require the following tools:
Phillips #0 screwdriver
Phillips #1 screwdriver
Plastic scribe
NOTE:
The #0 screw driver is for screws 0-1 and the #1 screw driver is for screws 2-4
microSD card
Removing microSD card
1.
Follow the procedure in
Before working inside your computer
.
2.
Press in on the microSD card to release it from the computer.
3.
Remove the microSD card from the computer.
Installing microSD card
1.
Slide the SD card into its slot until it clicks into place.
2.
Install the
microSD card
.
3.
Follow the procedure in
After working inside your computer
.
Base cover
Removing base cover
1.
Follow the procedure in
Before working inside your computer
.
2.
Remove the
microSD card
.
3.
To remove the base cover:
a.
Loosen the M2.5x7 captive screws that secure the base cover to the computer [1, 2].
2
8
Disassembly and reassembly