Dell Latitude 3180 Owners Manual - Page 24

Display bezel, Removing display bezel

Get Dell Latitude 3180 PDF manuals and user guides View all Dell Latitude 3180 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 24 highlights

5. Place the metal bracket over the (display cable) connector, and tighten the M2.0x3.0 screws to secure the display cable to the computer. 6. Connect the WLAN cables. 7. Place the metal bracket, and tighten the M2.0x3.0 screw to the WLAN cable on the system board. 8. Install the: a. battery b. base cover c. microSD card 9. Follow the procedure in After working inside your computer. Display bezel Removing display bezel 1. Follow the procedure in Before working inside your computer. 2. Remove the: a. microSD card b. base cover c. battery 3. Remove the hinge cap and the mylar cap that secures the display bezel to the display assembly [1,2]. 4. Remove the M2.5x3.5 screws and pry the edges to release the display bezel from the display assembly Installing display bezel 1. Place the display bezel on the display assembly. 2. Starting from the top corner, press on the display bezel and work around the entire bezel until it clicks on to the display assembly. 3. Replace the screws to secure the display bezel to the display assembly. 4. Affix the hinge cap. 24 Disassembly and reassembly

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
5.
Place the metal bracket over the (display cable) connector, and tighten the M2.0x3.0 screws to secure the display cable to the
computer.
6.
Connect the WLAN cables.
7.
Place the metal bracket, and tighten the M2.0x3.0 screw to the WLAN cable on the system board.
8.
Install the:
a.
battery
b.
base cover
c.
microSD card
9.
Follow the procedure in
After working inside your computer
.
Display bezel
Removing display bezel
1.
Follow the procedure in
Before working inside your computer
.
2.
Remove the:
a.
microSD card
b.
base cover
c.
battery
3.
Remove the hinge cap and the mylar cap that secures the display bezel to the display assembly [1,2].
4.
Remove the M2.5x3.5 screws and pry the edges to release the display bezel from the display assembly
Installing display bezel
1.
Place the display bezel on the display assembly.
2.
Starting from the top corner, press on the display bezel and work around the entire bezel until it clicks on to the display assembly.
3.
Replace the screws to secure the display bezel to the display assembly.
4.
Affix the hinge cap.
24
Disassembly and reassembly