Dell Latitude 3180 Owners Manual - Page 14

Installing M.2 Solid State Drive, Audio board, Removing audio board

Get Dell Latitude 3180 PDF manuals and user guides View all Dell Latitude 3180 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 14 highlights

Installing M.2 Solid State Drive NOTE: If the system is shipped with SSD perform the following steps. 1. Align the notch on the SSD card with the tab on the SSD card connector and slide the card into the slot. 2. Align the screw hole on the SSD card with the screw hole on the system board. 3. Replace the screw that secures the SSD card to the system board. 4. Install the: a. battery b. base cover c. microSD card 5. Follow the procedure in After working inside your computer. Audio board Removing audio board 1. Follow the procedure in Before working inside your computer. 2. Remove the: a. microSD card b. base cover c. battery 3. To remove the audio board: a. Disconnect the audio cable from the connector on the audio board [1]. b. Remove the M.2.0x3.0 screw that secures the audio board on the computer [2]. c. Lift the audio board away from the computer [3]. 14 Disassembly and reassembly

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
Installing M.2 Solid State Drive
NOTE:
If the system is shipped with SSD perform the following steps.
1.
Align the notch on the SSD card with the tab on the SSD card connector and slide the card into the slot.
2.
Align the screw hole on the SSD card with the screw hole on the system board.
3.
Replace the screw that secures the SSD card to the system board.
4.
Install the:
a.
battery
b.
base cover
c.
microSD card
5.
Follow the procedure in
After working inside your computer
.
Audio board
Removing audio board
1.
Follow the procedure in
Before working inside your computer
.
2.
Remove the:
a.
microSD card
b.
base cover
c.
battery
3.
To remove the audio board:
a.
Disconnect the audio cable from the connector on the audio board [1].
b.
Remove the M.2.0x3.0 screw that secures the audio board on the computer [2].
c.
Lift the audio board away from the computer [3].
14
Disassembly and reassembly