Dell C9010 Modular Chassis Switch EMC Networking Command-Line Reference Guide - Page 637

dcb-policy buffer-threshold (Interface Configuration) Assign the DCB policy to the DCB buffer threshold profile on interfaces. This setting takes precedence over the global buffer-threshold setting. C9000 Series Syntax Parameters dcb-policy buffer-threshold profile-name buffer-threshold profile-name Configure the profile name for the DCB buffer threshold Enter the name of the profile, which can be a string of up to 32 characters in length. Default Command Modes Command History None INTERFACE mode This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking OS Command Line Reference Guide. Version The following is a list of the Dell Networking OS version history for this command. Version 9.9(0.0) 9.7(0.1) 9.7(0.0) 9.3(0.0) Description Introduced on the C9010. Introduced on the S3048-ON and S4048-ON. Introduced on the S6000-ON. Introduced on the S4810, S4820T, and S6000 platforms. Usage Information You can configure up to a maximum of four lossless (PFC) queues. By configuring four lossless queues, you can configure four different priorities and assign a particular priority to each application that your network is used to process. For example, you can assign a higher priority for time-sensitive applications and a lower priority for other services, such as file transfers. You can configure the amount of buffer space to be allocated for each priority and the pause or resume thresholds for the buffer. This method of configuration enables you to effectively manage and administer the behavior of lossless queues. show qos dcb-buffer-threshold Display the DCB buffer threshold assigned to a QoS policy. C9000 Series Syntax Parameters show qos dcb buffer-threshold {name} name Enter the name of the profile, which can be a string of up to 32 characters in length. Data Center Bridging (DCB) 637