DeLonghi ESAM5600SL Owner Manual - Page 9

5. "Press OK": then press the icon corresponding to OK on the display (fig. 2)."Please wait..."is displayed and the appliance begins to deliver water from the hot water spout. The appliance ends the first start up procedure and goes off. The coffee maker is now ready for normal use. Please Note: • When using the appliance for the first time, you need to make 4/5 cups of coffee or 4/5 cappuccinos before the appliance starts to give satisfactory results. TURNING THE APPLIANCE ON Please Note: If the appliance is not used for an extended period, place the main switch in the 0 position (fig. 7). Important! Never place the main switch in the 0 position while the appliance is on. MENU SETTINGS The settings menu is divided into 3 sections indicated by different icons. Each section is divided into groups as described below: Please Note: Before turning the appliance on, make sure the main switch on the back of the appliance is in the I position (fig. 1). Each time the appliance is turned on, it performs an automatic preheat and rinse cycle which cannot be interrupted. A drop animation indicates that rinsing is underway (see section "Meaning of animations"). The appliance is ready for use only after completion of this cycle. SETTINGS • Language • Energy Saving • Coffee temperature • Water hardness • Display contrast • Beep • Default values Danger of burns! During rinsing, a little hot water comes out of the coffee spouts MAINTENANCE and is collected in the drip tray underneath. Avoid contact with splashes of water. • To turn the appliance on, press the button (fig. 5). The appliance begins the heating cycle indicated by a • Descaling • Statistics thermometer icon (fig. 6) which fills as the cycle advan- ces. During heating, the machine performs an automatic rinse cycle: as well as heating the boiler, the appliance CLOCK also heats the internal circuits by circulating hot water. Once heating is complete, the appliance shows the time and the coffee taste and quantity selection bars set to the standard values ("standard"quantity and taste). The coffee maker is now • Adjust time • Auto-Start • Auto-Off (Stand-by) ready for use. To access the required section, press the P icon and use the se- TURNING THE APPLIANCE OFF Each time the appliance is turned off, it performs an automatic rinse cycle which cannot be interrupted. lection icons (C4 and C10) to scroll until the image you want is displayed. Then press the icon to confirm (or the P icon again to exit). Please Note! Important! When navigating in the settings menu and you want to exit, To avoid damaging the appliance, always press the (fig. press the P icon a number of times. 5) button to turn off. Danger of burns! During rinsing, a little hot water flows from the coffee spouts. Avoid contact with splashes of water. To turn the appliance off, press the button (fig. 5). The appliance performs the rinse cycle then goes off. Setting the language To modify the language on the display, proceed as follows: 1. Choose the"SETTINGS"section as described above; 2. Press the selection icons < or > until"Language"is displa- yed; 11