DeLonghi ESAM5600SL Owner Manual - Page 19

DISPLAYED MESSAGES DISPLAYED MESSAGE POSSIBLE CAUSE FILL TANK! • Insufficient water in the tank. SOLUTION • Fill the tank with water and/or insert it correctly, pushing it as far as it will go until it clicks into place. GROUND TOO FINE ADJUST MILL! Insert water spout and press OK INSERT WATER SPOUT! EMPTY GROUNDS CONTAINER! • The grinding is too fine and the coffee is delivered too slowly or not at all. • The water spout is not inserted or is inserted incorrectly. • The grounds container is too full or more than 3 days have passed since you last made coffee (this guarantees correct hygiene of the machine). • Repeat coffee delivery and turn the grinding adjustment dial one click clockwise towards "7" while the coffee mill is in operation. If after making at least 2 coffees delivery is still too slow, repeat the correction procedure, turning the grinding adjustment dial another click until delivery is correct. If the problem persists, press the icon corresponding to OK and deliver water from the spout until it flows out normally. • Insert water spout as far as it will go. • Empty the grounds container and clean, then replace. Important: when removing the drip tray, the grounds container must be emptied, even if it contains few grounds. If this is not done, when you make the next coffees, the grounds container may fill up more than expected and clog the machine. INSERT GROUNDS CONTAINER • After cleaning, the grounds container has not been • Open the service door, remove the drip tray and replaced. insert the grounds container. ADD PRE-GROUND COFFEE DESCALE! LESS COFFEE! • The"ground coffee"function has been selected • Place pre-ground coffee in the funnel or deselect the without placing any pre-ground coffee in the funnel. "ground coffee"function. • The funnel is clogged. • Empty the funnel with the help of the spatula on the cleaning brush provided , as described in the section "Cleaning the pre-ground coffee funnel". • The machine must be descaled. • The descaling procedure described in the "Descaling" section needs to be performed as soon as possible. • Too much coffee has been used. • Select a milder taste or reduce the quantity of preground coffee and then request the coffee again. FILL BEANS CONTAINER! INSERT INFUSER ASSEMBLY! • The coffee beans have run out. • The pre-ground coffee funnel is clogged. • The infuser has not been replaced after cleaning. • Fill the beans container • Empty the funnel with the help of a brush as described in the section "Cleaning the pre-ground coffee funnel". • Insert the infuser as described in the paragraph "Cleaning the infuser". 21