D-Link DES-6300 Product Manual - Page 130
RIP Filters, RIP Interface Table, Default Route Metric, Auto Send, Virtual Distance, Router >
View all D-Link DES-6300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 130 highlights
Modular L3 Ethernet Switch User's Guide To edit RIP Interface Table fields: 1. Display the RIP Interface Table. 2. Select an entry in the table. 3. Click . The RIP Interface Table Edit window opens: Figure 6- 98. RIP Interface Table Edit window The RIP Interface Table Edit window display the following fields: ♦ Default Route Metric - Metric for the default route entry in RIP updates originated on this interface. Zero indicates that no default route is originated. ♦ Auto Send - When this parameter is enabled, this device advertises RIP messages in the default metric only. This allows some stations to learn the default router address. If the device detects another RIP message, Auto Send is disabled. Enable this parameter to minimize network traffic when the device is the only router on the network. ♦ Virtual Distance - Virtual number of hops assigned to the interface. This fine-tunes the RIP routing algorithm. 4. Edit the required fields. The IP Address field cannot be modified. 5. Click . 6. Close the RIP Interface Table Edit window. The RIP Interface Table opens. 7. Click . When the Status field displays "Finished!", the fields are confirmed as modified. RIP Filters IP RIP filtering is a device feature that improves aggregate routing performance. Defining IP RIP filters reduces the RIP table size to the relevant IP subnets, allowing for a faster table lookup and relearning memory for other purposes. RIP filters are supported from software version 3.03 and up. To display the RIP filters: ♦ Select Router > IP > RIP > RIP Filters. The IP RIP Filter window opens: 130