D-Link COVR-C1203 User Manual - Page 36
Auto Configuration SLAAC/DHCPv6, Auto Configuration
View all D-Link COVR-C1203 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Section 3 - Configuration Auto Configuration (SLAAC/DHCPv6) Select Auto Configuration if your ISP assigns your IPv6 address when your router requests one from the ISP's server. Some ISPs require you to adjust settings on your side before your router can connect to the IPv6 Internet. IPv6 DNS Settings DNS Type: Select either Obtain DNS server address automatically or Use the following DNS address. If Use the following DNS address is selected: Primary DNS Enter the primary DNS server address. Server: Secondary DNS Enter the secondary DNS server address. Server: LAN IPv6 Address Settings Enable DHCP-PD: Enable or disable prefix delegation services. LAN IPv6 Link- Displays Covr Point A's LAN link-local address. Local Address: If Enable DHCP-PD is disabled, these additional parameters are available for configuration: LAN IPv6 Address: Enter a valid LAN IPv6 address. LAN IPv6 Link- Displays Covr Point A's LAN link-local address. Local Address: D-Link COVR-C1203 User Manual 32