D-Link COVR-C1203 User Manual - Page 24
PPPoE, Select, if your ISP provides and requires you to enter a PPPoE username
View all D-Link COVR-C1203 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Section 3 - Configuration PPPoE Select PPPoE if your ISP provides and requires you to enter a PPPoE username and password in order to connect to the Internet. Username: Enter the username provided by your ISP. Password: Enter the password provided by your ISP. Reconnect Mode: Select either Always on, On Demand, or Manual. Maximum Idle Enter a maximum idle time (in minutes) during which the Internet Time: connection is maintained during inactivity. To disable this feature, select Always on as the reconnect mode. Advanced Settings Address Mode: Select Static IP if your ISP assigned you the IP address, subnet mask, gateway, and DNS server addresses. In most cases, select Dynamic IP. If you selected Dynamic IP as the Address Mode: Service Name: Enter the ISP service name (optional). Primary DNS Enter the primary DNS server IP address assigned by your ISP. This Server: address is usually obtained automatically from your ISP. Secondary DNS Enter the secondary DNS server IP address assigned by your ISP. This Server: address is usually obtained automatically from your ISP. MTU: Maximum Transmission Unit - you may need to change the MTU for optimal performance with your ISP. D-Link COVR-C1203 User Manual 20