BenQ SW271C User Manual - Page 23

2. Connect the PC video cable The video cables included in your package and the socket illustrations on the right may vary depending on the product supplied for your region. To Connect the HDMI Cable Connect the plug of the HDMI cable to the HDMI port on the monitor. Connect the other end of the cable to the HDMI port of a digital output device. To Connect the DP Cable Connect the plug of the DP cable to the monitor video socket. Connect the other end of the cable to the computer video socket. After the monitor and the computer are powered on, if the image is not displayed, disconnect the DP cable. Connect the monitor to any video source other than DP first. Go to System and DP on the OSD menu of the monitor and change the setting from 1.4 to 1.1. Once the setting is done, unplug the current video cable and re-connect the DP cable. To go to the OSD menu, see Basic menu operation on page 47. To Connect the USB-C™ Cable Connect the plug of the supplied USB-C™ cable to the USB-C™ port on the monitor. Connect the other end of the cable to the USB-C™ port of a laptop. It allows signal, audio, and data transmission from the laptop to the monitor. The USB-C™ port on the monitor supports power delivery. See Power delivery of USB-C™ port on your monitor on page 20 for more information. If a separately purchased USB-C™ cable is used, make sure the cable is certified by USB-IF and is full-featured, with power delivery and video / audio / data transfer functions. Due to USB-C™ technology limitation, the USB transmission speed is determined only by the selected refresh rate. See USB-C Configuration on page 64 and Options for data transfer via USB-C™ on page 65 for more information. Either Or Or How to assemble your monitor hardware 23