BenQ SW271C User Manual - Page 10

roller and keep it from cleaning the monitor screen properly., for a long time.

Page 10 highlights

• Do not blow-dry the roller. • Do not try to wipe the roller clean by a wet cloth or tissue as the fibers may be left on the roller and keep it from cleaning the monitor screen properly. • Do not expose the roller to direct sunlight. Keep it away from sources of heat (such as radiators, space heaters, stoves, and so on). • Use and store the roller between 0 °C - 40 °C. Put the roller back to its box if it is not used for a long time. °C ~ 40°C • If your monitor screen can not be cleaned up by the roller even if it is properly washed, contact local customer service for the availability of a new roller. BenQ Service If you drop the roller by accident, dirt or tiny sharp debris may be stuck on the silicon roller. Wash and dry it before use. 10

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70

10
• Do not blow-dry the roller.
• Do not try to wipe the roller clean by a wet cloth or tissue as the fibers may be left on the
roller and keep it from cleaning the monitor screen properly.
• Do not expose the roller to direct sunlight. Keep it away from sources of heat (such as
radiators, space heaters, stoves, and so on).
• Use and store the roller between 0 °C - 40 °C. Put the roller back to its box if it is not used
for a long time.
• If your monitor screen can not be cleaned up by the roller even if it is properly washed,
contact local customer service for the availability of a new roller.
°C ~ 40°C
BenQ Service
If you drop the roller by accident, dirt or tiny sharp debris may be stuck on the silicon roller. Wash and dry it
before use.