BenQ SW271C User Manual - Page 22

Gently attempt to pull them back apart to check that, they have properly engaged.

Page 22 highlights

Tighten the thumbscrew on the bottom of the monitor base as illustrated. And then turn the stand counterclockwise to face forward. 3 1 2 Gently turn the screen over to install the monitor stand arm and base. Orient and align the stand arm with the monitor ( 1 ), push them together until they click and lock into place ( 2 ). Gently attempt to pull them back apart to check that they have properly engaged. Carefully lift the monitor, turn it over and place it upright on its stand on a flat even surface. You should position the monitor and angle the screen to minimize unwanted reflections from other light sources. 1 2 Quick Start Guide 22 How to assemble your monitor hardware

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70

22
How to assemble your monitor hardware
Tighten the thumbscrew on the bottom of the monitor
base as illustrated. And then turn the stand
counterclockwise to face forward.
Gently turn the screen over to install the monitor stand
arm and base.
Orient and align the stand arm with the monitor (
),
push them together until they click and lock into place
(
).
Gently attempt to pull them back apart to check that
they have properly engaged.
Carefully lift the monitor, turn it over and place it
upright on its stand on a flat even surface.
You should position the monitor and angle the screen to
minimize unwanted reflections from other light sources.
3
2
1
1
2
1
2
Quick Start Guide