BenQ MW612 User Manual - Page 31
Direct Power On, Signal Power On, POWER, Auto Power Off, Power Off Timer, Panel Key Lock, Settings
View all BenQ MW612 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Operation Settings Security Settings Power On/Off Settings • Direct Power On: Allows the projector to turn on automatically once the power is fed through the power cord. • Signal Power On: Sets whether to turn the projector directly on without pressing POWER or ON when the projector is in standby mode and detects a VGA signal or a HDMI signal with 5V power. • Auto Power Off: Allows the projector to turn off automatically if no input signal is detected after a set period of time to prevent unnecessary waste of lamp life. • Power Off Timer: Sets the auto-shutdown timer. Instant Restart Allows you to restart the projector immediately within 90 seconds after turning it off. Panel Key Lock With the control keys on the projector locked, you can prevent your projector settings from being changed accidentally (by children, for example). When the Panel Key Lock is on, no control keys on the projector will operate except POWER. To release panel key lock, press and hold (the right key) for 3 seconds on the projector or turn this function off using the remote control. If you turn off the projector without disabling panel key lock, the projector will still be in locked status the next time it is turned on. Change Password See Utilizing the password function on page 21. Power On Lock See Utilizing the password function on page 21. Baud Rate Selects a baud rate that is identical with your computer's so that you can connect the projector using a suitable RS-232 cable and update or download the projector's firmware. This function is intended for qualified service personnel. HDMI Equalizer Adjusts the equalizer gain settings for an HDMI signal. The higher the setting, the stronger the gain value. If there are more than one HDMI port on the projector, select the HDMI port first before adjusting the value. USB Power Switch Disables or enables "Type A connector" 5V power output for QCast Mirror HDMI wireless dongle. Reset Settings Returns all of the adjustments you've made for the Settings menu to the factory preset values. Menu operation 31