BenQ MW612 User Manual - Page 16
Auto-adjusting the image, Fine-tuning the image size and clarity, Correcting keystone, QUICK INSTALL
View all BenQ MW612 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Auto-adjusting the image In some cases, you may need to optimize the picture quality. To do this, press AUTO. Within 3 seconds, the built-in Intelligent Auto Adjustment function will re-adjust the values of Frequency and Clock to provide the best picture quality. The current source information will be displayed in the corner of the screen for 3 seconds. This function is only available when PC signal (analog RGB) is selected. Fine-tuning the image size and clarity Adjust the projected image to the size that you need using the zoom ring. Sharpen the image by rotating the focus ring. Correcting keystone Keystoning refers to the situation where the projected image becomes a trapezoid due to angled projection. To correct this, you will need to manually correct it following these steps. 1. Do one of the following steps to display the keystone correction page. • Press / on the projector or remote control. • Press QUICK INSTALL on the remote control. Press to highlight Keystone and press OK. Press . Press . • Go to Advanced Menu - Display > Keystone and press OK. 2. After the Keystone correction page displays. Press to correct keystoning at the top of the image. Press to correct keystoning at the bottom of the image. 16 Positioning your projector