BenQ MW612 User Manual - Page 24
Menu operation, Basic menu
View all BenQ MW612 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Menu operation Please note that the on-screen display (OSD) menus vary according to the signal type selected and the projector model you are using. The menu items are available when the projector detects at least one valid signal. If there is no equipment connected to the projector or no signal detected, limited menu items are accessible. Basic menu Brightness Adjust this control so the black areas of the image appear just as black and that detail in the dark areas is visible. There are several options to set the image's aspect ratio depending on your input signal source. • Auto: Scales an image proportionally to fit the projector's native resolution in its horizontal or vertical width. (MS610/ MX611) (MW612) 15:9 picture Aspect Ratio • Real: Projects an image as its original resolution and resizes it to fit within the display area. For input signals with lower resolutions, the projected image will be displayed in its original size. • 4:3: Scales an image so that it is displayed in the center of the screen with a 4:3 aspect ratio. 4:3 picture 16:9 picture 4:3 picture • 16:9: Scales an image so that it is displayed in the center of the screen with a 16:9 aspect ratio. 16:9 picture • 16:10: Scales an image so that it is displayed in the center of the screen with a 16:10 aspect ratio. 16:10 picture 24 Menu operation