Behringer NEUTRON Quick Start Guide - Page 21

40 NEUTRON User Configurable Options & Features (EN) Step 4: User Configurable Options & Features Assignable Output It is possible to select the source of the "ASSIGN" output jack. To change the source press & hold the "OSC SYNC" button until both the "RANGE" buttons are flashing. The currently selected assignable output is indicated by the flashing LFO shape LED - the available options are (clockwise from the sine shape): 1. OSC 1 CV 2. OSC 2 CV 3. "Note On" velocity 4. Modwheel 5. Aftertouch Use the two range buttons to change the selected output. When you're done press & hold the "OSC SYNC" button until the "RANGE" buttons stop flashing. The currently selected assignable output value will be stored & will persist across power cycles. TUNING The Neutron will self-calibrate at start-up. An additional "tune" feature is designed to allow the user to manually tune the oscillators to the last played midi note. To tune OSC1 or OSC2 press & hold the appropriate "RANGE" button until the octave LED starts to flash. Play a MIDI note. The LFO shape LEDS will display the tuning - turn the TUNE control until only the descending saw LED is lit. To exit tuning mode press & hold the RANGE button until the octave LED stops flashing. Note tuning is not available when in +/-10 Octave mode. (3 octave LEDs on). ADVANCED FEATURES Please refer to the Neutron user manual available at musictri.be for more detailed information. OSC & LFO SHAPE MODE BLEND OR SWITCHED It is possible to either blend or switch the OSC & LFO shape. This feature is incredibly powerful unique sound creation tool. For OSC1 press & hold "OSC1 RANGE" button (this will enter the tuning feature). The "PARAPHONIC" button will flash if shape mixing is disabled, or it will throb if shape mixing is enabled. Press the "PARAPHONIC" button to toggle the shape mix state. Press & hold the "OSC1 RANGE" to leave this mode. Similarly, for OSC2 shape mixing press & hold "OSC2 RANGE"; for LFO shape mixing press & hold "LFO KEY SYNC" Quick Start Guide 41 Advanced Features Change Assignable Output (ASSIGN) Envelope Retriggering Access Hold OSC SYNC Hold OSC SYNC OSC 1 Shape (Blend or Switched) OSC 2 Shape (Blend or Switched) LFO (Blend or Switched) OSC 1 Tuning Hold OSC1 RANGE Hold OSC2 RANGE Hold LFO KEY SYNC Hold RANGE 1 OSC 2 Tuning Hold RANGE 2 Poly Chain mode Hold PARAPHONIC Action Use RANGE buttons to change Output function the KEY TRK button toggles the retriggering mode PARAPHONIC will either throb or flash. Push to toggle mode PARAPHONIC will either throb or flash. Push to toggle mode PARAPHONIC will either throb or flash. Push to toggle mode LFO shape LEDs shows tuning with respect to the last played MIDI note LFO shape LEDs shows tuning with respect to the last played MIDI note The LED will pulse slowly in mono mode - quickly in duo mode Result LFO shape displays selected option. When the KEY TRK LED is on retriggering is enabled OSC 1 Shape mode will toggle. Blend or switch OSC 2 Shape mode will toggle. Blend or switch LFO Shape mode will toggle. Blend or switch Top center LFO Shape LED indicates that the oscillator is in tune Top center LFO Shape LED indicates that the oscillator is in tune Poly-Chain mode toggled on/off Exit Hold OSC SYNC Hold OSC SYNC Hold OSC 1 RANGE Hold OSC 2 RANGE Hold LFO KEY SYNC Hold RANGE 1 Hold RANGE 2 Hold PARAPHONIC